36 Inch Round Shape Stainless Steel Modern Contemporary Entry Door Handle Bar Ladder Pull Shower Glass Sliding Barn Door Interior Exterior Door Pull Push Dark Mahogany Birch Wood Brushed Ends Finish

KeyTiger Part Number - KT3119-900-01.

Each purchase comes as a PAIR of door pulls for inside and outside of a single door. For double doors, 2 pairs are required.

Dimensions: Total length - 900mm / 36 inches | Center-to-Center Mounting Distance - 700/27.56 (MM/INCHES) | Diameter or Cross-section - 38/1.5 (MM/INCHES).

Door Type: Mountable on all types of doors including but not limited to glass and wooden doors. 3 pairs of mounting bolts provided for different door types - (34 or 43mm), 84mm & 120mm for mounting to up to 3.2 inches door thickness.

Material: High-endurance Stainless Steel 304 alloy for rust, corrosion and stain resistance.

Instructions: Please refer to the detailed published manufacturer's installation instruction (currently not provided in print with packaged product). Drill and create two thruholes between 0.315 - 0.600 inches (0.375 is recommended) on the door with a Center-to-Center Mounting Distance as specified above. Note that this is the theoretical distance and the actual distance may vary slightly so always measure the parts in hand for the actual distance.

Compatible with Decorative Fittings for Single-Sided Installation using KeyTiger Part Number: KTKIT-19-ROUND-P (or -B), KTKIT-25-ROUND-P (or -B), KTKIT-32-ROUND-P (or -B), KTKIT-38-ROUND-P (or -B), KTKIT-2538-SQUARE-P (or -B) and KTKIT-3015-SQUARE-B (or -B).

These door pulls can be used without additional decorative fittings for single-sided installation. Please refer to manufacturer's installation instruction (NOT currently provided as print with packaged item).

The KeyTiger door pulls do NOT LOCK by itself and are usually used in conjunction with deadbolts and/or door catches such as roller catches, magnetic catches, ball catches and others.