2PCS 27232 11/32"x36" Car Brake Booster Vacuum Hose Kit 300PSI with Clamps,Soft Power Brake Vacuum Lines Automotive as Replacement,Essential Brakes Booster Vacuums Hose Automotive Parts

2PCS 27232 11/32"x36" Car Brake Booster Vacuum Hose Kit 300PSI with Clamps,Soft Power Brake Vacuum Lines Automotive as Replacement,Essential Brakes Booster Vacuums Hose Automotive Parts

• Parameter Information: Our car brake booster vacuum lines are 36.22 inch in total length, 16 mm / 0.63 inch OD, 8.64 mm / 0.34 inch ID (11/32 inch), 3.81 mm / 0.15 inch wall thickness, 300PSI working pressure, 700PSI burst pressure. Refer to the above information before buying
• Replacement of Aging Hose: Our car brake bRer vacuum hose is widely used in cars, light trucks, etc, for hose replacement and repair, engine adaptation, brake system modification, etc. Replaces OEM 465-27232, GAT27232, suitable for most: 27230, 27231, 27233, 27234
• High Temperature Resistance: EPDM is used as the material of 27232 car power brake vacuum hose, which is famous for its good resistance to high temperature and aging, and the working temperature is between -40°F and +284°F, so you don't have to worry about deformation and softening
• You Will Receive: Car brake booster vacuum hose*2, clamps*4 specially prepared for you in the package, each hose is long enough to be cut according to your actual vehicle layout, and the included clamps can be flexibly adjusted for providing fixing effect
• Installation Steps: Prepare the screwdriver and other tools in advance. According to the layout of car, cut the hose, install it to corresponding position. And use dedicated hose clamp to secure it in place (no too tight or too loose). Before installation, please disconnect the vehicle power supply