200x200 Resolution 1.54inch E-Ink Display Module Electronic E-paper Sreen with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo
Product Description
200x200 Resolution 1.54inch E-Ink Display Module Electronic E-paper Sreen with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
- Ultra low power consumption, basically power is only required for refreshing
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
- No backlight, keeps displaying last content for a long time even when power down
200x200, 1.54inch E-Ink display module, SPI interface
Overview
This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Specifications
- Operating voltage: 3.3V/5V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 48mm - 33mm
- Display size: 27.6mm - 27.6mm
- Dot pitch: 0.138 - 0.138
- Resolution: 200 - 200
- Display color: black, white
- Grey level: 2
- Partial refresh time: 0.3s
- Full refresh time: 2s
- Refresh power: 26.4mW(typ.)
- Standby powerïœ0.017mW
- Viewing angleïž170°
Package Content
- 1.54inch e-Paper Module x1
- PH2.0 20cm 8Pin x1
Note:100% original from Waveshare, technical support is provided ,please feel free to contact us !
Technical Specifications
You might also like
HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
HiLetgo 2pcs ESP8266 NodeMCU LUA CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great with Arduino IDE/Micropython (Pack of 2PCS)
MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino
HiLetgo BME280 Atmospheric Pressure Sensor Temperature Humidity Sensor Breakout for Arduino
Tri-Color 1.54 inch E-Ink Display Module Three-Color Resolution 200x200 3.3v E-Paper Electronic Screen Panel with Embedded Controller SPI Interface Support
Raspberry Pi 7" Touch Screen Display
ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant
HiLetgo 5pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V Humidity Measure Range 20%-95% Temperature Measure Range 0-50℃ Celsius with Dupont Wires
HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU
Vilros Raspberry Pi Zero W Basic Starter Kit- Black Case Edition-Includes Pi Zero W -Power Supply & Premium Black Case