1-Gang Rocker Metal Electrical Box Cover, 4x4 Inch Square

1-Gang Rocker Metal Electrical Box Cover, 4x4 Inch Square

• 1-GANG ROCKER SWITCH COVER — Finishes a 4-inch square electrical box with a single opening sized for a Decora rocker switch or GFCI device. When the box is mounted on the surface and the device still has to sit square and clean, this is the cover that gets it there without shims, filing, or a second trip to the supply house.
• GALVANIZED STEEL BUILD — Heavy-gauge galvanized steel gives this metal electrical box cover the rigidity to stay flat under a tightened device and the corrosion resistance to hold up in damp basements, garages, and unconditioned utility spaces. Steel does not flex, crack, or yellow the way a plastic plate will after a few years on the wall.
• 1/2 INCH RAISED PROFILE — The 1/2-inch raised cover pulls the device forward to the correct depth so the switch seats properly and the plate lands flush against the steel. Flat covers leave the yoke sitting too deep on a raised-device install, and that is where the crooked switches and stripped screws come from.
• BUILT FOR EXPOSED WORK — Surface wiring in commercial, industrial, and utility environments needs a cover that protects the splice and keeps grounding continuity through the box. This surface mount junction box cover is made for exposed conduit runs, shop walls, and mechanical rooms where the wiring is meant to be seen and serviced.
• FITS STANDARD 4-INCH SQUARE BOXES — Sized for the common 4x4 square box, also called a 1900 box, with the standard two-hole mounting pattern. Measure your box across the face at 4 inches and this cover lines up the first time — no guessing on the order, no returning a plate that misses the tapped holes by an eighth of an inch.
• ELEVEN CONFIGURATIONS AVAILABLE — Same cover, same steel, different device layouts: toggle, duplex receptacle, single receptacle, dryer outlet, 2-gang rocker, 2-gang toggle, and mixed switch and receptacle combinations. Whatever the panel schedule calls for, the matching configuration is one click away in this listing.
• MADE IN THE USA — Manufactured domestically to tight forming tolerances, which is the reason the corners stay crisp and the screw holes land where they should. Matching screws included so the cover goes on the box the moment it comes out of the box.
• AIRMONT PRODUCTS QUALITY — Built for reliability and durability on every electrical installation, because electricians know us, and we know electricians.