1/4" NPT Brass Electric Solenoid Valve 220V AC Normally Closed VITON (standard USA pipe thread). Solid Brass, Direct Acting, Viton Gasket Solenoid Valve (AC 220V,1/4inch)

Solid Normally Closed Electric Solenoid Valve; 1/4"ports, brass body, Viton seal, 220 volt AC, for air, water, or fuel Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with three-eighth inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton gasket. The direct current coil energizes at 220 volts AC;voltage range +- 10%. 18 Watt power rating. Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 128 PSI; for oil: 0 to 99 PSI; for air or gases: 0 to 128 PSI. 1/4" (4 mm) flow aperture permits a unidirectional flow capacity of 0.6 gallons per minute (GPM) of water at 60oFwith a pressure drop of 1 PSI (0.6 Cv). Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis system, electronic control of tank selection, water line, or motorcycle air shocks.