123-0093 Stem Assembly for 500 Series Mansfield Style Full-turn Hydrants, 12-inch Overall Length, Prevent Leakage

123-0093 Stem Assembly for 500 Series Mansfield Style Full-turn Hydrants, 12-inch Overall Length, Prevent Leakage

• ✴️【Fitment】Fit For Mansfield 500 series（1970-2006）full-turn hydrants; Will Replace stem for 500 series
• ✴️【Application】 Get you out off mansfield spigot leaking issues: water dripping, faucet not turning off, spigot leaking
• ✴️【Quality】Make of high-quality copper, the stem marks itself by its excellent resistance to corrosion.
• ✴️【Item Included】1*stem(12inch); 1*packing washer; 2* graphite packing (left hand& right hand)
• ✴️【Specification】 Part No.: 123-0093; OAL(Overall Length): 12 inch, wihch is the point to get a right stem!!
• ✴️【Note】1) The KEY to get a right stem is to measure the overall length of the stem! This stem get an OAL of 12 inch. Check it before purchase! 2)When doinng the measurement, be careful NOT to have the spring loaded tip get stuck inside. 3) Make sure the water turns off when you do the repair.
• ✴️【Installation Tips】1) Always confirm that your original stem measures 12 inches OAL before installation. 2)Debris inside the hydrant can damage the new seals and cause future leaks so it is necessary to clean the hydrant body before installation. 4)If it leaks after installation, tighten the packing nut gradually (about 1/8 to 1/4 turn at a time) to stop it. Do not overtighten.
• ✴️【Friendly Service】 A f-u-l-l refund is available within 30 days if you are not satisfied; we also offer a 12-month warranty from the date of purchase to make sure that you have good experience.