1/2" to 1/4" Router Bit Collet Extension and Reducer. Extends The Router Bit an Additional 2-1/4" and Accepts 1/4" Shank Router Bits Into the Collet
Product Description
1/2" to 1/4" Router Bit Collet Extension and Reducer. Extends The Router Bit an Additional 2-1/4" and Accepts 1/4" Shank Router Bits Into the Collet
- Give your router bits an additional 2-1/4" when you extend them through the router table top with our router collet extension. Eliminate the dangerous temptation of withdrawing the shank from the collet in order to raise the bit and to “provide the full depth of cut.
- This allows you to use your router when you need to make deeper cuts. This generally happens when using bits like dish carving bits and some engraving bits.
- The router collet extension makes it possible to use all diameters of 1/4" shank bits safely. Place the router collet extension shank in the 1/2" router collet and the router bit shank in the extension collet and tighten both
- Instructions included. Use with 1/2" collet routers only.
- Can not be used on a router with only a 1/4" collet. Your router must have a 1/2" collet to accept this extension properly
Give your router bits an additional 2-1/4" when you extend them through the router table top with our router collet extension. Eliminate the dangerous temptation of withdrawing the shank from the collet in order to raise the bit and to "provide the full depth of cut." This allows you to use your router when you need to make deeper cuts. This generally happens when using bits like dish carving bits and some engraving bits. The router collet extension makes it possible to use all diameters of 1/4" shank bits safely. Place the router collet extension shank in the 1/2" router collet and the router bit shank in the extension collet and tighten both. Instructions included. Use with 1/2" collet routers only.
Technical Specifications
You might also like
CMT 796.001.00 Router Collet Chuck Extension for 1/2-Inch Collets, 1/2-Inch Shank
Whiteside Router Bits 6400 Steel Router Collet with 1/4-Inch Inside Diameter and 1/2-Inch Outside Diameter
MLCS 9464 Router Collet Extension, 1/2-Inch Shank, Accepts 1/2-inch Shank Bits
DCT Wood Router Table Collet Bit 1/2 to 2-1/4" Inch Extension for 1/2" Bits - For Raising Table-Mounted Router Bits
Whiteside 6210 CNC Spoilboard Surfacing Router Bit, 1/4\" Shank
uxcell 1/2-Inch Shank 2-Inch Cutting Dia Double Flute Carbide Tipped Cleaning Bottom Router Bit
Bosch RA1151 Router Subbase Centering Pin and Cone
1/2 Inch Shank 2-1/4 Inch Diameter Bottom Cleaning Router Bit Woodworking Milling Cutter By SILIVN(1 Pack)
POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Bolts and Washers(Set of 10)
Bosch RA1129 Template Guide Adapter Set