1/2 Pound Red Anodized Aluminum Jump Rings 16G 3/16" ID (2300+ Rings)

1/2 Pound Red Anodized Aluminum Jump Rings 16G 3/16" ID (2300+ Rings)

• You are looking at One Half Pound of quality Anodized Aluminum jump rings for making outstanding jewelery or mail armor. These rings are saw cut by an extremely precise jewelers saw (0.008" thick) to make perfect closings for your projects.
• The dimensions of the rings are 3/16 inch(4.8MM) Inside Diameter and roughly 5/16 inch(8MM) Outside Diameter. Aspect Ratio(AR) = 3.0
• The wire is 14AWG/16SWG or 1.6MM in Diameter
• There are approximately 2300 rings in each half pound bag(measured by weight), we always include extra in each bag just in case there are any defects from the manufacturing process. The color shade can vary from batch to batch so be sure to order everything you need at once if you are doing a large project.
• They are made of aluminum which is coiled first then anodized before being cut. The Anodized layer is very tough and won't scratch off as easily as coated or enameled rings. Each batch does include some defects due to how they are made. We always include extra to account for any defects you may receive! Every ring will have an un-anodized area where the cut is made, so when you close them they should appear as a solid color. Doing the anodizing in this way ensure the brightest finish possible.