U.S. Solid 1/2 in Brass Electric Solenoid Valve, DC 12 V, Normally Closed, FKM Seal, 4.8 Cv, Semi-Direct, for Air Gas Fuel and Oil
Product Description
U.S. Solid 1/2 in Brass Electric Solenoid Valve, DC 12 V, Normally Closed, FKM Seal, 4.8 Cv, Semi-Direct, for Air Gas Fuel and Oil
- FAST RESPONSE, OPENS FROM 0 BAR: A semi-direct design opens from 0 bar with no minimum pressure differential and switches open or closed in under 1 second when energized or de-energized, rated for over 1 million cycles
- INDUSTRIAL BRASS, FOR FUEL GAS AND OIL: A corrosion-resistant brass body suits gasoline, diesel, kerosene, natural gas, air, and oils; because brass contains lead, do not use it for drinking water
- FKM SEAL FOR HEAT AND FUEL: The FKM (fluoroelastomer) seal resists high temperatures and corrosive chemicals, fuels, oils, and lubricants over -10 to 120 °C (14 to 248 °F) where NBR or EPDM seals would swell
- NORMALLY CLOSED, NOT CONTINUOUS DUTY: An internal spring holds it closed with no power; energize the DC 12 V coil (20 W) to open. Not a continuous-duty valve, so limit energizing to 8 hours per cycle to protect the coil
- FOR IRRIGATION, RO, AND MORE: Controls flow for fuel and gas handling, irrigation, reverse osmosis, home brewing, and DIY projects, passing 4.8 Cv through a 16 mm orifice, rated IP65
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, one-half inch (1/2") female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, gasoline, kerosene, or diesel fuel.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.
Brand: U.S. Solid
Model: USS2-00001
Size: 1/2"
Flow Aperture: 16 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Rated voltage: DC 12 V, ± 10%
Current: 1.667 A
Power rating: 20 W
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 4.8 Cv
Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
Quality assurance: CE Certified
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.
Technical Specifications
You might also like
1/2" Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR
EDGE INDUSTRIAL 5/16" Hose ID to 1/2" Male NPT MNPT Straight Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG (Qty 1)
3/8" Electric Solenoid Valve 12-VDC, VITON Gasket, Air, Gas, Fuel Normally Closed
3/4" Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON
Southern Truck 11025 Fits 1999-2019 Ford, 1999-2012 Dodge, 2011-2019 Chevy/GMC Diesel Auxiliary Tank Install Kit, 1½" Fill Line
CONCORD 304 Stainless Steel 3/8" Barb Hose to 1/2" NPT Home Brew Fitting. 2 Pack
Southern Truck 11408 Fits 2013-2019 Dodge Trucks Diesel Auxiliary Install Kit, 1¾" Fill Line
Joywayus 1/2" Female 3/4" Male Soild Brass Water Tank Connector Theaded Bulkhead Fitting with 2 Rubber Ring Stablizing
Brass Pipe Fitting, SUNGATOR 1/2-Inch x 1/2-Inch NPT Male Pipe, Hex Nipple (5-Pack)
HFS 110v Ac or 12v Dc Electric Solenoid Valve Water Air 1/4", 1/2", 3/4", 1" NPT Available (12V DC 1/2" NPT)