1/2 Inch 45 Degree PVC Elbow Fittings, Fits 0.84" OD SCH40 Pipe, 10 Pack

1/2 Inch 45 Degree PVC Elbow Fittings, Fits 0.84" OD SCH40 Pipe, 10 Pack

• CHECK YOUR SIZE FIRST: These 1/2 inch 45 degree PVC elbow fittings match standard SCH40 pipe with a 0.840" outside diameter. Measure the outside diameter before you order, since hardware store sizing varies and a socket that is too loose will not seat properly.
• HOW DEEP THE PIPE SEATS: Each socket takes a 1/2" SCH40 pipe to a maximum insertion depth of 1.1 cm (0.43 in) before it reaches the internal stop. Plan your cut lengths and frame spacing around that number so both ends of a structure line up the same way.
• FULL WALL THICKNESS, NOT THINNED: These 45 degree PVC elbows keep true SCH40 wall thickness instead of a thinned copy, so the socket holds its shape when a pipe is pressed in. The white furniture grade surface is smooth, with clean socket mouths for visible indoor builds.
• SMOOTHER TURNS THAN A 90: A 45 degree bend eases the flow path more than a sharp corner joint, so water and air move with less resistance. Use them for irrigation runs, drain lines, greenhouse hoops and garden frames where every joint needs the same even angle.
• PLAIN ENDS, GLUE OR DRY FIT, 10 PACK: Both ends are plain slip sockets, so you can solvent weld for a permanent joint or dry fit your layout first and adjust it. Ten white fittings per order cover one greenhouse hoop or a full shelving frame, and there are no threads to strip.