1-1/4 Inch PVC 45 Degree Elbow Fittings, 10 Pcs White Socket Ends

1-1/4 Inch PVC 45 Degree Elbow Fittings, 10 Pcs White Socket Ends

• CHECK YOUR PIPE SIZE FIRST: These 1-1/4 inch PVC elbow fittings fit 1.66 in outside diameter SCH40 pipe. Measure your pipe OD before ordering, because 1-1/4 in labels vary between brands and a loose socket will not hold a glued joint tight.
• 2.6 CM SOCKET DEPTH: Each socket accepts up to 2.6 cm (about 1.02 in) of pipe, so you can test the seat before you glue anything. Push the pipe in this far and the elbow lines up square, giving you a straight, even turn every time.
• SMOOTH 45 DEGREE TURNS: A 45 degree elbow eases the bend better than a sharp 90, so runs turn with less strain and fewer tight corners. Build garden frames, greenhouse hoops, shelf units, storage racks and repair runs with one clean angle.
• GLUE IT OR DRY FIT IT: Both ends are plain sockets with no threads to strip. Solvent weld them with primer and PVC cement for a permanent joint, or dry fit first to test your layout, then glue once the frame lines up the way you want it.
• 10 PCS IN ONE BOX: You get 10 white 1-1/4 in PVC 45 degree elbow fittings, enough for a full shelf, rack or greenhouse frame build without a second order. Keep a few spares for plant supports, drain line repairs and weekend projects.