10Ft Vacuum Hose Automotive,ID 1/8 Inch (3mm) Silicone Vacuum Hose for Transporting Air and Water,Universal Vacuum Lines Automotive Accessories for Car Truck SUV

10Ft Vacuum Hose Automotive,ID 1/8 Inch (3mm) Silicone Vacuum Hose for Transporting Air and Water,Universal Vacuum Lines Automotive Accessories for Car Truck SUV

• KIND REMINDER: Our vacuum hose has a length of 10 feet, an inner diameter of 1/8 inch (3mm), and an outer diameter of 0.35 inch (9mm). To ensure that the product meets your usage needs, please carefully measure and confirm that the outer diameter value of your application is no different from our inner diameter value (3mm) before placing an order.
• APPLICABLE SCENARIOS: This car vacuum hose is mainly suitable for air transmission (high-temperature steam, hot air) and water transmission (low/high-temperature liquids). But not applicable to gases, gasoline, diesel, gravel, high-pressure sandblasting, and other fluids containing sharp particles. Please make sure to carefully confirm whether our product is compatible with your application before placing an order, in order to avoid any issues of unsuitability.
• QUALITY SILICONE MATERIAL: The vacuum hose is made of carefully selected black solid silicone. The inner and outer walls are smooth, soft and tough, can be twisted and pressed at will, rebound and not easy to deform. Strong and durable, not easy to aging and break, long service life.
• RELIABLE SEALING: This vacuum hose automotive has a thickened diameter and a uniform wall thickness of about 3mm, which is not easy to collapse. When using this hose, the water comes out evenly and smoothly. And the silicone hose insulation and sealing is reliable, suitable for a variety of sealing environment.
• IMPORTANT PARAMETERS: Our vacuum lines working pressure: 30PSI, working temperature: +220℃ to -40℃, burst pressure: 100PSI, even in all kinds of extreme weather or environment. (Note: Since the wall thickness of our products is only 3mm, it is recommended not to exceed the maximum ultimate working pressure: 55PSI)
• INSTALLATION STEPS: 1. First remove the worn pipe for easy replacement. 2. Then determine the desired length and cut with scissors. 3. Finally, use the clip (not included in the package) to secure it at the end of the pipe.