1000x Collated Concrete Nails 1-1/4 Inch (32mm) for Hilti GX 3 (GX3), GX 100, GX 120 Nailer, GX MX Collated Strip, Full Round Head Hardened Steel Pins for Metal Track, Drywall & Concrete

1000x Collated Concrete Nails 1-1/4 Inch (32mm) for Hilti GX 3 (GX3), GX 100, GX 120 Nailer, GX MX Collated Strip, Full Round Head Hardened Steel Pins for Metal Track, Drywall & Concrete

• FITS YOUR NAILER - Compatible with the Hilti GX 3, GX 100, and GX 120 nailers using GX MX collation - loads and feeds without modification
• GX MX COLLATED STRIP - matches the magazine feed exactly; drops in and feeds cleanly on the first shot, no jams, no modification
• HARDENED STEEL, FULL ROUND HEAD - 1-1/4 Inch (32 mm) length, 3.0 mm shank, ballistic-grade hardened steel pins that drive flush and hold tight in concrete, block, and steel
• RIGHT LENGTH FOR THE JOB - 32 mm is the pro pick for heavy track runs, thicker base material, and dense substrate; use the medium to high power setting for clean flush drives
• 1000-COUNT PRO PACK - retail-boxed collated strips ready for direct magazine loading; consistent length, hardness, and collation for uninterrupted work